Sorry, this page is not translated yet. Automatic translation used.
The stationary transistor radio "Lyubava" from the beginning of 1974 produced the Riga Radio Engineering software. Ship radio all-wave "Lyubava" was created on the basis of the radio "Victoria 001". It provides reception of radio broadcasts in the bands DV, SV, HF and VHF to an external (ship) antenna. You can connect the player and tape recorder to record or play the received radio programs. The kit includes an external speaker. The radiofrequency unit is placed in a case trimmed with fine wood veneer. The HF range is divided into 8 subranges from 13 to 130 m, switched by a drum switch. A special feature is the KV1 range (PV - intermediate waves) 60 ... 130 m. In the receiver there are VHF-1 and VHF-2 ranges corresponding to Soviet and European standards. The real sensitivity with an output power of 50 mW and a signal-to-noise ratio of 20 dB from an external antenna on a DV, CB, KV - 10 ... 40 μV, on VHF - 1.5 - 2.5 μV. The adjacent channel selectivity is 60 ... 70 dB. The receiver uses one channel of the power amplifier, the same as in the radiol. The nominal output power of an amplifier with a load of 8 ohms is 4 W, the maximum 16 W. The band of operating frequencies when working on VHF - 40 ... 16000 Hz. The AU contains three direct-frequency different-frequency heads: low-frequency 8GD-1, mid-frequency 4GD-6, high-frequency 3GG-2 and separation filters. The receiver has an internal (control) speaker 0.25 GD-2. Speaker dimensions - 675x360x270 mm, weight - 18 kg.