Sorry, this page is not translated yet. Automatic translation used.
The stationary cassette recorder Comet-220-Stereo has been prepared by the Novosibirsk TochMash factory since 1983.
It is designed for the use of three types of magnetic tapes in MK-60 cassettes.
The recording level is controlled by dial indicators and quasi-peak value indicators.
There is a light indication of turning on, operating modes and temporary stop of the tape, the ability to connect the remote control and stereo phones.
The device is made in the form of two blocks: a tape recorder and a power amplifier.
It used the CVL and electronic components from the tape recorder-consoles `` Mayak-231-stereo ''.
In contrast to it, a cassette holder is used here, which provides installation and lifting of the cassette using a special damping device.
In the tape recorder there is a counter for controlling the consumption of the tape, hitchhiking.
There are tone controls for treble and bass.
Main technical characteristics: tape drawing speed 4.76 cm / s;
detonation coefficient ± 0.2%;
the working range of reproducible frequencies when using tape Fe 40 ... 12500 Hz, Cr 40 ... 14000 Hz, FeCr 40 ... 16000 Hz;
the relative level of noise and interference without BB on the tape Fe -55 dB, Cg -59 dB, FeCr -61 dB;
rated voltage at linear output 0.5 V;
rated output power at a load of 4 ohms 2x10 W;
the tone control range at a frequency of 63 Hz is ± 6 dB, 16000 Hz - ± 10 dB.
Power consumption 130 watts.
The dimensions of the tape recorder are 460x362x152 mm, weight 10.5 kg.
Dimensions UM - 460x272x112 mm, weight - 7 kg.