The Nota MP-220C prefix tape recorder and the Nota M-220C tape recorder have been produced since 1987 by Novosibirsk PA Luch.
The two-cassette stereo tape recorder Nota MP-220S is designed for high-quality recording and dubbing of phonograms to MK60 and MK90 cassettes and their subsequent playback through stereo phones or UKU.
The device has: two lpm, which provide dubbing from tape to tape: playback of the first record and sequential playback of the second tape, at the end of the first and vice versa.
The control of the modes of the device is pseudo-sensory on logical elements, makes it possible to include the modes of the tape recorder in any sequence.
The device has: the ability to work with magnetic tapes based on Fe and Cr;
search for the desired place of the phonogram by pause;
dynamic noise reduction system.
Belt speed - 4.76 cm / s;
detonation coefficient of not more than 0.2%, the working frequency range when working with tape type Fe 40 ... 12500 Hz, Cr 40 ... 16000 Hz;
the relative level of noise and interference in the recording and playback channel, respectively -50 and -55 dB;
power consumption 35 W;
dimensions of the MP -430x300x135 mm;
weight is 9 kg.
Since 1990, the prefix tape recorder Nota MP-220S-1 has been produced, and since 1992 the tape recorder prefix Nota MP-220S-2.
The difference between the prefix tape recorder Nota MP-220S-1 and the second only in that instead of the timbre block there is a Ton Correction button that provides the rise of the high and low power amplifier.
Full tape recorder `` Note M-220C '', which, in addition to the presence of terminal bass amplifiers, did not differ from the set-top box recorder.
Subsequent upgrades, like the MP in 1990 and 1992, added one number to the name, for example, the Nota M-220S-1 and Nota M-220S-2 tape recorders.
There are slight differences between the tape recorders from each other, so in the place where in the Nota M-220C1 model there are switching LEDs of the type "Cr", in the Nota M-220C2 model they are absent, instead of them there is a low-frequency and high-frequency tone block, possibly in
due to this, there is no recording on the "Nota M-220C2" tape recorder onto a "Cr" type magnetic tape or only LEDs were removed, and the "Fe-Cr" type tape switch remained.
,null,ru,null,null,null,nullThis switch in the "Note M-220C1" model stood under the hinged cover on the right, at the bottom of the front panel of the device, as well as the switch "Toncorrection", "Sequential playback" and "Memory by counter" in the model "Note M-220C1".
In the magazine Radio, an advertisement about the C1 model indicated damping of the cassette receivers, but they were not in reality.
,null,ru,null,null,null,null