Sorry, this page is not translated yet. Automatic translation used.
The Crystal-101-Stereo network reel tape recorder was prepared for release in 1973.
Manufacturer not installed.
Since 1975, on the basis of this model, the Rostov-101-stereo serial tape recorder has been produced, almost its complete analogue.
The Crystal-101-stereo tape recorder is designed for high-quality recording and reproduction of speech or music programs from a microphone, pickup, receiver, TV, radio line, or dubbing from another tape recorder.
The "Crystal-101-stereo" tape recorder has such functions as: dubbing from track to track, with the simultaneous overlay of a new recording on an existing one;
the ability to get stunt records;
synchronous recording of programs on two channels;
acoustic recording control;
visual control of recording by two dial indicators with a fixed and moving tape;
volume control;
stereo balance and the ability to temporarily stop the tape in the "Pause" mode from a wired remote control;
belt flow control by mechanical counter;
automatic shutdown of the LPM at the end or break of the tape;
lock enable mode recording and dubbing.
The tape drive mechanism of the device is made according to a single-motor kinematic scheme and runs on an asynchronous electric motor KD6-4.
The CVL is equipped with devices damping the unevenness of the tension of the tape in the coils.
The speed of the magnetic tape is 19.05, 9.53 and 4.76 cm / sec, the detonation coefficients are ± 0.1, ± 0.2 and ± 0.3%, respectively.
The duration of continuous recording or playback using coils No. 18, tape type 10 at a speed of 19.05 cm / sec 4x45 min, 9.53 cm / sec 4x90 min and 4.76 cm / sec 4x180 min.
The range of working sound frequencies at a higher speed of 40 ... 18000 Hz, an average of 40 ... 14000 Hz and at a lower 63 ... 8000 Hz.
Rated output power 2x12.5 watts.
The relative level of interference in the channel recording-playback 45 dB.
The acoustic system of the tape recorder consists of 2 separate small speakers of the type "10MAC-1".
Power is supplied from a network of 127 or 220 V. Power consumption is 100 watts.The dimensions of the tape recorder are 540x405x210 mm.
Weight is 22 kg.